3-Dimensional Evaluation of Two PNAM Techniques (Modified Grayson & AlignerNAM) on Facial Soft Tissue Morphology: A Randomised Clinical Trial.

OBJECTIVE: Evaluate facial changes after Presurgical Naso-Alveolar Molding (PNAM) in unilateral cleft lip and palate (UCLP) patients treated with Modified Grayson Technique and AlignerNAM (with DynaCleft nasal elevator) using a 3D facial scan. DESIGN: Randomised clinical trial. SETTING: Institutional study. Participants: 20 UCLP patients allocated to two groups (10 patients each). INTERVENTIONS: Group A patients underwent PNAM with Modified Grayson Technique and Group B patients underwent AlignerNAM (with DynaCleft nasal elevator). Their 3D facial scans were obtained by using an iOSbased application (Bellus3D FaceApp) mounted on a novel frame. These .stl files were analysed using 3D software (GOM INSPECT) at three-time intervals; before intervention (T0), after intervention (T1) and one month after lip repair surgery (T2). MAIN OUTCOME MEASURE(S): Changes in facial and nasolabial morphology. RESULTS: Both techniques brought significant improvement in the columellar length, nasal tip projection, columella angle, nasal tip angle and a significant reduction in cleft width. At T1, a statistically significant difference in angular and linear measurements was present in both groups. At T2, no statistically significant difference in linear parameters was observed between the two groups except for the outer lateral height of the non-cleft side, basal lateral height of the non-cleft side, and philtrum width. Similar pattern was observed in angular measurements with no statistically significant difference between the two groups except in nasolabial angle, anterior nasal base triangle III, and anterior nasal root triangle. CONCLUSIONS: Aligner NAM and Modified Grayson technique are equally effective PNAM methods with similar clinical results in nasolabial morphology after lip repair surgery.

Cytotoxicity Evaluation of Various Composite Resin Materials: An In Vitro Study.

Aim This study aimed to determine and compare the cytotoxicity of light-cured composite resin (Enlight light cure composite (Ormco, Glendora, California, USA)), light-cured acrylic resin (Orthocryl LC (Dentaurum, Ispringen, Germany)), and the self-cure acrylic (DPI RR cold cure acrylic (Dental Products of India, Bombay Burmah Trading Corporation Ltd., Mumbai, India)) material and to determine which component is best to be used for the purpose of nasal stent fabrication in the nasoalveolar molding (NAM) technique for cleft therapy. Methods Circular discs made from Enlight light cure composite, Orthocryl LC, and self-cure acrylic were submerged for 24 hours in gingival fibroblast media (three discs of each material) and control medium (three discs of each material) that were both contained in plates. After analyzing the optical densities of the plates, the cytotoxicity of the products was assessed by measuring cell viability using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The compiled data was analyzed using IBM SPSS Statistics for Windows, V. 23.0 (IBM Corp., Armonk, NY). The normality of the data was evaluated using the Shapiro-Wilk test. One-way analysis of variance (ANOVA) and pairwise comparison made with Tukey's honestly significant difference (HSD) post hoc test with a significance level (p) of 0.05 were considered. Results The percentage of cell viability was between 80% and 150%. A significant mean difference was noted in the cell viability between the three groups (p=0.009). High mean cell viability was seen in Orthocryl LC. However, there was no significant mean difference between Orthocryl LC and Enlight light cure composite material (p=0.854). Conclusion Both Orthocryl LC and Enlight light cure composite materials are less cytotoxic when compared to the self-cure acrylic resin material and can be used to fabricate the nasal stent component for infants with cleft defects, undergoing NAM procedure.

Presurgical management trends and nasoalveolar molding usage for infants with cleft lip and palate in the capital of a developing country.

BACKGROUNDS: Nasoalveolar molding (NAM) application is among presurgical management (PSM) techniques used for infants with cleft lip and palate (CLP). It helps to approximate the palatal cleft and to reshape the nasoalveolar complex prior to primary lip repair. This study aimed to explore types of PSM and the dental speciality provision for infants with CLP in Baghdad. The status of NAM usage and surgeons' perceptions toward NAM usage were assessed. MATERIALS AND METHODS: This is a cross-sectional paper-based questionnaire study that collected responses of surgeons perform primary lip and nose repair regarding PSM. The questionnaire was distributed amongst public and private hospitals in Baghdad. Twenty surgeons were enrolled (only those surgeons who perform primary repair for infants with CLP); two females and eighteen males. RESULTS: The majority of participants' responses suggested that the majority of infants with CLP were provided with baby feeding plates and lip straps. Six surgeons reported that a percentage of their patients who have been provided with NAM. PSM in Baghdad was mostly supplied by orthodontists and plastic surgeons, and the next most likely providers were prosthodontists. 82.35% of the surgeons found that primary surgical repair procedures were easier with NAM than for the other infants. The rest have not perceived any differences. CONCLUSIONS: Orthodontists, surgeons and prosthodontists were involved in providing PSM. Baby feeding plates and lip straps were the most common PSM in Baghdad, although NAM is not uncommon. Most surgeons believe that using NAM made surgical procedures easier and permitted the prediction of surgical outcomes.

Presurgical Infant Orthopedic Videos on YouTube™: A Thematic Analysis of Caregiver Narratives.

OBJECTIVE: Information regarding how caregivers cope when using presurgical infant orthopedic (PSIO) appliances is sparse. This study aimed to understand caregivers' perspectives and experiences with contemporary PSIO treatment. DESIGN: PSIO videos shared on the YouTube™ platform were used as the data source. Videos with caregivers were identified (n = 21) and portions with caregiver narratives were transcribed. This was followed by the application of a six-step thematic analysis as conceptualized by Braun and Clarke (2006, 2019). RESULTS: Two themes were identified from the caregiver narratives in the PSIO videos. The Family Journey theme included reaction to diagnosis, choice of center, burden of care, care commitment, coping, and testimonials. The Information theme included PSIO techniques and PSIO benefits. CONCLUSION: Multifaceted challenges and coping strategies were described by caregivers during the PSIO phase. Caregivers remained committed to treatment despite the burden of care, were motivated by an understanding of the benefits of PSIO, and customized care based on their individual strengths and needs. Study results can help providers gain an understanding of what caregivers experience outside the clinical environment.

Biocreative Alveolar Molding Plate Treatment (BioAMP) for neonatal unilateral cleft lip and palate with excessively wide alveolar cleft and maxillary arch width.

Since its inception in Europe in the 1950s, alveolar molding treatment for neonates with complete cleft lip and palate has undergone significant evolution in both design and application methodology, demonstrating effectiveness in normalizing the alveolar cleft and nasal shape. However, excessively wide alveolar clefts accompanied by disproportionately wide total maxillary arch pose significant challenges when utilizing conventional alveolar molding methods involving cyclical adding and grinding of acrylic on molding plates. The current report introduces a novel alveolar molding method named Biocreative Alveolar Molding Plate Treatment (BioAMP), which can normalize the maxillary alveolar cleft and arch shape without laborious conventional acrylic procedures. BioAMP sets the target arch form and provides unrestricted space for natural growth of the maxillary alveolar bones while systematically reducing the total maxillary arch width in precise increments. Two exemplary cases are presented as proof-of-concept, showcasing the clinical innovation of BioAMP.

Effects of nasoalveolar molding on nasolabial aesthetics in patients with cleft lip and palate during pre-adolescence: A systematic review and meta-analysis of retrospective studies.

This study aims to analyze long-term effects of nasoalveolar molding (NAM) as a part of cleft primary management protocols on nasolabial aesthetics for patients with non-syndromic cleft lip and palate by conducting a systematic review and meta-analysis. Six electronic databases and two journals were searched up to July 2023. Studies comparing nasolabial outcomes between NAM and non-NAM protocols were selected for further analysis. Nasolabial aesthetics were the outcome of interest. Data extraction, methodological quality assessment, risk of bias assessment, meta-analysis and subgroup analysis were performed. Seven retrospective cohort studies were selected for a qualitative review and four for a quantitative analysis. The risk of bias assessment was moderate for most studies. Only studies utilizing the Asher-McDade rating (AMR) were included for meta-analyses. The protocols with NAM exhibited a significantly lower AMR score for vermillion border than other protocols. AMR scores for nasal form and nasal symmetry from protocols with NAM were significantly lower than protocols without any pre-surgical infant orthopaedics (PSIO) but not significantly different from protocols with other PSIO techniques. The AMR score for nasolabial profile from protocols with NAM was not significantly different from other protocols. However, subgroup analysis demonstrated that protocol combining NAM and primary rhinoplasty significantly lowered AMR scores for nasal form, nasal symmetry and nasolabial profile. For patients with unilateral cleft lip with or without palate (UCLP), this study found that a protocol combining NAM and primary rhinoplasty improved nasolabial outcomes while a protocol with NAM alone offered only limited benefits. For patients with BCLP, the available evidence remains inconclusive. Performing NAM in combination with primary rhinoplasty improves nasolabial aesthetics in patients with UCLP. PROSPERO (CRD4202128384).

Effects of nasoalveolar molding on maxillary arch dimensions and malocclusion characteristics in primary dentition patients with cleft lip and palate.

BACKGROUND: Nasoalveolar molding (NAM) is a presurgical orthopedic technique used in the management of cleft lip and palate deformities. Despite the widespread use of NAM therapy, there is a need for further investigation to assess its specific effects on arch dimensions and malocclusion characteristics. AIM: To evaluate the effects of NAM therapy on maxillary arch dimensions and malocclusion characteristics in patients with unilateral cleft lip and palate (UCLP) and bilateral cleft lip and palate (BCLP). DESIGN: Patients in primary dentition were referred to the Institutional Department of Orthodontics. The NAM group consisted of 21 patients with UCLP (mean age 4.7 ± 0.7 years) and 12 patients with BCLP (mean age 4.8 ± 0.7 years). Sixteen patients with UCLP (mean age 4.9 ± 0.9 years) and five patients with BCLP (mean age 5.4 ± 1.1 years) were included in the non-NAM group. The plaster models of all patients were digitized. Dental arch dimensions and malocclusion characteristics were analyzed via digital software. One-way ANOVA with Bonferroni correction was used for statistical analysis. RESULTS: Intercanine and intermolar widths showed statistically significant differences according to the cleft type (p < .01). There was no statistically significant effect of NAM therapy on maxillary arch parameters and malocclusion characteristics (p > .05). The prevalence of anterior crossbite was 12.1% in the NAM group and 23.8% in the non-NAM group. CONCLUSION: NAM therapy did not affect the maxillary arch dimensions and malocclusion characteristics in patients with UCLP and BCLP. The cleft type was the main factor, leading to a significant difference in maxillary widths.

Influence of presurgical nasoalveolar molding (PNAM) treatment in maxillary dental arch width and nasolabial symmetry in patients with unilateral complete cleft lip and palate.

Unilateral complete cleft lip and palate (UCCLP) is one of the most severe clinical subphenotypes among nonsyndromic cleft lip and/or palate (NSCL/P), that complicates surgical repair operations. Presurgical nasoalveolar molding (PNAM) is a technique used to reshape the nose, lip and alveolar bone of infants with UCCLP before surgery (the modified Mohler rotation advancement cheiloplasty and two flap palatoplasty), with the potential to facilitate surgical repair. However, the effectiveness of PNAM treatment is still a matter of debate. In this paper, the 3Shape scanning system and 3dMD stereophotography were used to assess the short-term and long-term effects of PNAM treatment on the dental arch morphology and nasolabial features of patients with UCCLP, respectively. The findings indicated that PNAM treatment negatively affects both short-term and long-term dental arch shape compared to the treatment without PNAM, particularly in terms of limiting the transverse width of the maxillary canine-to-midline. Regarding the nasal and labial symmetry, PNAM improves the symmetry of the nasal alae in patients over 7 years old and the symmetry of the lip in patients under 7 years old. Moreover, UCCLP patients who received PNAM treatment exhibited a shorter and wider shape of the nostril on the cleft side compared to those without PNAM treatment. In clinical practice, the multidisciplinary team should carefully consider the advantages and disadvantages of the outcomes of PNAM treatment when treating infants with cleft lip and palate.

Lessons Learned from a Single Institution's Eight Years of Experience with Early Cleft Lip Repair.

Background and Objectives: The traditional approach in managing wide cleft lip deformities involves presurgical nasoalveolar molding (NAM) therapy followed by surgical cleft lip repair between three and six months of age. This institution has implemented an early cleft lip repair (ECLR) protocol where infants undergo primary cleft lip repair between two and five weeks of age without NAM. This study aims to present this institution's ECLR repair protocol over the past eight years from 188 consecutive patients with unilateral or bilateral CL/P deformity. Materials and Methods: Retrospective review was conducted at Children's Hospital Los Angeles evaluating patients who underwent ECLR before three months of age and were classified as American Society of Anesthesiologists (ASA) class I or II from 2015-2022. Anthropometric analysis was performed, and pre- and postoperative photographs were evaluated to assess nasal and lip symmetry. Results: The average age at cleft lip repair after correcting for gestational age was 1.0 ± 0.5 months. Mean operative and anesthetic times were 120.3 ± 33.0 min and 189.4 ± 35.4, respectively. Only 2.1% (4/188) of patients had postoperative complications. Lip revision rates were 11.4% (20/175) and 15.4% (2/13) for unilateral and bilateral repairs, respectively, most of which were minor in severity (16/22, 72.7%). Postoperative anthropometric measurements demonstrated significant improvements in nasal and lip symmetry (p < 0.001). Conclusions: This analysis demonstrates the safety and efficacy of ECLR in correcting all unilateral cleft lip and nasal deformities of patients who were ASA classes I or II. At this institution, ECLR has minimized the need for NAM, which is now reserved for patients with bilateral cleft lip, late presentation, or comorbidities that preclude them from early repair. ECLR serves as a valuable option for patients with a wide range of cleft severity while reducing the burden of care.

Establishment of a novel classification system for alveolar morphology in infants with unilateral complete cleft lip and palate.

OBJECTIVES: Unilateral complete cleft lip and palate (UCCLP) is one of the most severe clinical subtypes among cleft lip and palate (CLP), making repair surgery and subsequent orthodontic treatment particularly challenging. Presurgical nasoalveolar molding (PNAM) has shown conflicting and heterogeneous results in the treatment of UCCLP patients, raising questions about whether the diversity in alveolar anatomical morphology among these patients plays a role in the effectiveness of PNAM treatment. MATERIALS AND METHODS: We collected 90 digital maxillary models of infants with UCCLP and performed mathematical clustering analysis, including principal component analysis (PCA), decision tree modeling, and area under the ROC Curve (AUC) analysis, to classify alveolar morphology and identify key measurements. We also conducted clinical evaluations to assess the association between the alveolar morphology and CLP treatment outcomes. RESULTS: Using mathematical clustering analysis, we classified the alveolar morphology into three distinct types: average form, horizontal form, and longitudinal form. The decision tree model, AUC analysis, and comparison analysis revealed that four measurements (Trans ACG-ACL, ML length, MG length and Inc length) were essential for clustering the alveolar morphology of infants with UCCLP. Furthermore, the blinded clinical evaluation indicated that UCCLP patients with alveolar segments of horizontal form had the lowest treatment outcomes. CONCLUSION: Overall, our findings establish a novel quantitative classification system for the morphology of alveolar bone in infants with UCCLP and suggest that this classification may be associated with the outcomes of CLP treatment. CLINICAL RELEVANCE: The multidisciplinary CLP team should thoroughly evaluate and classify the specific alveolar morphology when administering PNAM to infants with UCCLP.

Perception and Attitude of Parents of Children With Orofacial Clefts Regarding the Use of Presurgical Orthopedics and Feeding Obturators.

OBJECTIVE: This study aims to evaluate the parents' attitude and their perception regarding the management of orofacial cleft (OFC) children with presurgical nasoalveolar molding (PNAM), DynaCleft and/or feeding obturators. MATERIAL AND METHODS: A cross-sectional, descriptive and observational retrospective survey-based study was conducted among parents of OFC children treated with PNAM, DynaCleft and/or feeding obturators who attended a primary dental health care center in Al-Madinah, Saudi Arabia, from 2019 to 2023. A validated questionnaire was used after translating it from English to Arabic. The questionnaire consisted of 32 questions divided into two sections. The first section covers parents' sociodemographic data and OFC risk factors. The second section evaluates the parents' perception regarding the use of presurgical orthopedics (PSO) for OFC repair. The questionnaire was completed through telephone interviews carried out by two investigators with the parents of OFC children. RESULTS: Out of 142 parents of OFC children, only 40 parents and their children met the inclusion criteria of the study. Most parents (95%) reported their satisfaction with the treatment and stated that they would encourage other parents of OFC children to use PSO. CONCLUSION: This study concluded that parents of OFC children had a positive attitude toward PSO treatment. Based on the positive outcomes of PSO treatment reported in the current study and previous literature, PSO should be considered as a routine treatment in the early management of orofacial clefts.

Presurgical Orthopedic Nasoalveolar Molding in Cleft Lip and Cleft Palate: Case Report.

Aim and objective: The present clinical report describes management of complete unilateral cleft lip and palate with presurgical nasoalveolar molding (NAM) therapy for infants. Background: Orofacial clefts have a negative impact on the health and social integration of individuals affected. Patients undergo numerous procedures until they reach adolescence. The ultimate focus of surgical intervention is to improve the esthetic appearance of the lip and nose by improving the lip scar, nasal tip projection, and symmetry of the nasolabial complex. Case description: This paper discusses a situation in which the parents of a three days old baby with the chief complaint of regurgitation of milk while feeding. On examination, baby had complete left-sided cleft lip and cleft palate (CL+CP). Conclusion: Before surgery, nasoalveolar molding has been shown to be a useful adjunctive therapy for reducing hard and soft tissue cleft deformity. Clinical significance: Passive preoperative intervention of the lip and alveolar segments helps to reduce tissue tension and is thought to improve surgical outcomes by minimizing wound healing disturbances and scarring. How to cite this article: Shaik N, Eggula A, Pudi S, et al. Presurgical Orthopedic Nasoalveolar Molding in Cleft Lip and Cleft Palate: Case Report. Int J Clin Pediatr Dent 2023;16(4):659-662.

The impact of passive alveolar molding vs. nasoalveolar molding on cleft width and other parameters of maxillary growth in unilateral cleft lip palate.

OBJECTIVE: Passive alveolar molding (PAM) and nasoalveolar molding (NAM) are established presurgical infant orthodontic (PSIO) therapies for cleft lip palate (CLP) patients. PAM guides maxillary growth with a modified Hotz appliance, while NAM also uses extraoral taping and includes nasal stents. The effects of these techniques on alveolar arch growth have rarely been compared. MATERIAL AND METHODS: We retrospectively compared 3D-scanned maxillary models obtained before and after PSIO from infants with unilateral, non-syndromic CLP treated with PAM (n = 16) versus NAM (n = 13). Nine anatomical points were set digitally by four raters and transversal/sagittal distances and rotations of the maxilla were measured. RESULTS: Both appliances reduced the anterior cleft, but NAM percentage wise more. NAM decreased the anterior and medial transversal width compared to PAM, which led to no change. With both appliances, the posterior width increased. The alveolar arch length of the great and small segments and the sagittal length of the maxilla increased with PAM but only partially with NAM. However, NAM induced a significant greater medial rotation of the larger and smaller segment compared to PAM with respect to the lateral angle. CONCLUSIONS: NAM and PAM presented some significant differences regarding maxillary growth. While NAM reduced the anterior cleft and effectively rotated the segments medially, PAM allowed more transversal and sagittal growth. CLINICAL RELEVANCE: The results of this study should be taken into consideration when to decide whether to use PAM or NAM, since they show a different outcome within the first few months. Further studies are necessary regarding long-term differences.

Effect of Pre-Surgical Orthopedic Treatment on Hard and Soft Tissue Morphology in Infants with Cleft Lip and Palate.

The frequency of cleft lip and palate births in Japan is approximately 0.146%. The study aimed to compare the effects of NAM on restoring nasal morphology and improving extraoral nasal morphology in children with cleft lip and palate in the first stage of treatment using 3D imaging and oral model analysis. The subjects were five infants (37.6 ± 14.4 days old) with unilateral cleft lip and palate. The images taken with the 3D analyzer and oral model used for constructing the NAM at the first examination (baseline) and at the completion of the pre-surgical orthodontic treatment (157.8 ± 37.8 days old) were analyzed. The cleft distance was measured at the upper, middle, and lower points on the 3D images. On the model, the cleft jaw width at the maximum protrusion of the healthy and affected sides of the alveolar bone was measured. After the pre-surgical orthopedic treatment, the measured value on the model decreased significantly by a mean of 8.3 mm from baseline, and the cleft lip width narrowed by an average of 2.8 ± 2.2, 4.3 ± 2.3, and 3.0 ± 2.8 mm at the upper, middle, and lower points of the cleft, respectively. Pre-surgical orthopedic treatment using NAM can help narrow the width of the cleft jaw and lip. The sample size is stated at the study limit in the paper.

Surgical Assistance for Favorable Outcome Achieved through Presurgical Nasoalveolar Molding Using Innovative Impression Technique: A Case Report.

Aim: The aim of this case report is to highlight the importance of presurgical nasoalveolar molding (PNAM) in cleft lip and palate (CLP) cases and its impact on primary surgical outcomes. Background: Cleft lip and palate (CLP) is one of the most common congenital malformations of the maxillofacial complex. Of all congenital malformations, it ranks third and has a multifactorial etiology. Such anomalies can have several consequences, such as impaired suckling, defective speech, deafness, malocclusion, gross facial deformity, and bring tremendous stress on the entire family. Surgical correction is required to restore the form and function of the affected area; however, surgery has to be usually deferred due to the age of the newborn patients. Case description: A 12-day-old neonate born with a bilateral cleft of lip and alveolus was referred from the Department of Plastic Surgery. PNAM was planned in consultation with the plastic surgeon. A customized nasoalveolar molding plate was fabricated, and tissue molding was carried out. Following nasoalveolar molding, primary surgical repair was done. Conclusion: Significant reduction in cleft width, approximation of soft tissue of the lip, and improvement in nasal tip alignment were achieved following PNAM. It favorably positioned the tissue segment and minimized the extent of the local tissue dissection and advancement. The synchronous prosthodontics and surgical treatment resulted in optimal treatment outcomes. Clinical significance: The higher level of estrogen and hyaluronic acid in the newborn that remodels the cartilage can be utilized through the light application of forces, and hence hard and soft tissue molding can be achieved without surgery. PNAM acts as a promising adjunct prior to primary surgical closure of the CLP. Thus, PNAM immediately after the birth can serve to significantly augment the surgical outcomes and the extent and/or the number of surgeries can be reduced. How to cite this article: Rathee M, Singh K, Alam M, et al. Surgical Assistance for Favorable Outcome Achieved through Presurgical Nasoalveolar Molding Using Innovative Impression Technique: A Case Report. Int J Clin Pediatr Dent 2023;16(1):153-158.

Rehabilitation of an Orofacial Cleft through Presurgical Nasoalveolar Molding with a 1-year Follow-up.

Aim: To highlight the effectiveness of Presurgical Nasoalveolar Molding (PNAM) technique and the appliance used prior to the surgical reconstruction of cleft lip and palate in newborns. Background: In underdeveloped and developing countries, babies born with oral clefts, are generally anemic with low birth weight and may be unfit for surgery immediately. Feeding these babies is also difficult as the air leaks through the cleft and they cannot create the suction needed for suckling. Case description: Two newborn babies, presented with unilateral midfacial clefts involving the lip, alveolus and palate. Conclusion: The PNAM appliance enabled breast Feeding while lessening the soft tissue and cartilaginous deformity and allowing surgical soft tissue repair with minor scar formations. Clinical significance: PNAM can reduce the surgical burden and reduce the number of surgical revisions when initiated early. How to cite this article: Ferreira AN, Eswaramurthy P, Aras MA, et al. Rehabilitation of an Orofacial Cleft through Presurgical Nasoalveolar Molding with a 1-year follow-up. Int J Clin Pediatr Dent 2023;16(1):162-165.

Comparison of post-surgical soft tissue changes between bilateral cleft patients treated with and without a modified nasoalveolar molding appliance: A cohort study.

INTRODUCTION: The advantages of nasoalveolar molding (NAM) treatment for cleft lip and palate (CLP) patients have been well documented. A modified design for bilateral CLP was introduced. AIMS: This paper aimed to: 1- quantify the soft tissue changes after applying modified NAM treatment to these patients; and 2-compare post-surgical changes to a control group where no NAM was used. MATERIAL AND METHODS: At a tertiary care paediatric hospital, a historical cohort group of complete BCLP patients (n=15) was compared to a prospectively collected group of complete BCLP patients who underwent NAM therapy (n=15). In the NAM group (mean age: 1.1mos±0.2), a new modification of the NAM appliance was implemented. In the control group (mean age: 5mos±0.2), no NAM treatment was adopted prior to lip closure surgery. Soft tissue nasolabial segments were measured on initial (T1), post-NAM (T2) and 3 months post-surgery (T3) photographs; measurements were analysed statistically. RESULTS: In the NAM group, cleft size was reduced by 68 to 70% in 4-5months and all measurements improved between T1 and T2. Columellar crest inclination decreased by 74%, columellar length increased by 184%, nostril and bialar widths decreased by 36% and 16%, respectively. The lip philtrum was elongated by 49.5%. At T3, all soft tissue variables statistically improved better in NAM versus non-NAM groups. CONCLUSION: The modified NAM appliance provided improved results of lip approximation and nasal measurements compared to non-NAM treatment.

Novel Digital Workflow for Nasoalveolar Molding and Postoperative Nasal Stent for Infants With Cleft Lip and Palate.

OBJECTIVE: We present a novel digital workflow to provide presurgical infant orthopedic (PSIO) treatment for a patient with a unilateral cleft lip/palate utilizing nasoalveolar molding (NAM) and a custom postsurgical nasal stent. SETTING: Within the US military healthcare system, the Joint Base San Antonio Craniofacial Anomalies Team utilizes dental scanners, predictive 3D modeling software, and 3D printing technology in a digital workflow for NAM appliance fabrication. WORKFLOW: Soft tissue facial scanning, peri-oral scanning, and dental putty impressions are used to facilitate fabrication and measure outcomes. Digital modeling software and 3D resin printing are utilized to manufacture the prescribed devices. MAIN OUTCOME MEASURES AND RESULTS: Extra-oral facial scans and intra-oral impressions are compared between 3 timepoints: pre-treatment, posttreatment with NAM, and postsurgical treatment. CONCLUSIONS: The ability to share workflows, establish outcome standards, and streamline patient care will continue to advance best practices in digital PSIO.

Three-dimensional Changes of Maxillary Alveolar Morphology After Using Modified Nasoalveolar Molding in Patients with Complete Unilateral Cleft lip and Palate.

OBJECTIVE: This study aimed to evaluate the three-dimensional changes in maxillary alveolar morphology after using modified NAM in patients with complete unilateral cleft lip and palate. DESIGN: This is a retrospective study. SETTING: The study was carried out in the dental hospital, Faculty of Dentistry of Naresuan University, Phitsanulok, which serves as a tertiary care center. PATIENTS: The population sample consisted of 19 patients with nonsyndromic complete unilateral cleft lip and palate. INTERVENTION: All patients received the modified NAM treatment based on the treatment protocol of the Naresuan University Cleft and Craniofacial Center, Thailand. MAIN OUTCOME MEASURE: Dental models obtained at pre-treatment (T0) and post-treatment (T1) were scanned to construct the digital models. The maxillary digital models that showed dimensional changes between T0 and T1 were measured using a computer graphic software. RESULTS: The modified NAM resulted in a significant decrease in the anterior cleft width, posterior cleft width, and anterior arch width. Conversely, it caused a significant increase in the length of the lesser cleft segment and the greater segment rotation. However, the change in the height of both segments and posterior arch width was not found to be significant. CONCLUSIONS: The modified NAM was an effective device for reducing the alveolar cleft width while improving the alignment of alveolar cleft segments.

Rethinking the Rule of 10s: Early Cleft Lip Repair Improves Weight Gain.

OBJECTIVE: This study compares patients undergoing early cleft lip repair (ECLR) (<3-months) and traditional lip repair (TLR) (3-6 months) with/without nasoalveolar molding (NAM) to evaluate the effects of surgical timing on weight gain in hopes of guiding future treatment paradigms. DESIGN: Retrospective review. SETTING: Children's Hospital of Los Angeles, California. PATIENT, PARTICIPANTS: A retrospective chart review evaluated patients who underwent ECLR or TLR ± NAM from November 2009 through January 2020. INTERVENTIONS: No intervention was performed. MAIN OUTCOME MEASURE(S): Patient demographics, birth and medical history, perioperative variables, and complications were collected. Infant weights and age-based percentiles were recorded at birth, surgery, 8-weeks, 6-months, 12-months, and 24-months postoperatively. The main outcomes were weight change and weight percentile amongst ECLR and TLR ± NAM groups. RESULTS: 107 patients met inclusion criteria: ECLR, n = 51 (47.6%); TLR + NAM, n = 35 (32.7%); and TLR-NAM, n = 21 (19.6%). ECLR patients had significantly greater changes in weight from surgery to 8-weeks and from surgery to 24-months postoperatively compared with both TLR ± NAM (P < .05). Age-matched weights in the ECLR group were significantly greater than TLR ± NAM at multiple time points postoperatively (P < .05). CONCLUSIONS: ECLR significantly increased patient weights 24-months postoperatively when compared to TLR ± NAM. Specifically compared to TLR-NAM, ECLR weights were significantly greater at all time points past 6-months postoperatively. The results of this study demonstrate that ECLR can mitigate feeding difficulties and malnutrition traditionally seen in patients with cleft lip.